Bronze Harpoon Arrow Dart

A Bronze dart is an economical dart but if kept sharp will perform very well. Most will have a few of these darts rigged and ready if they have to cut it out quickly to get the harpoon ready again quickly. Rigged w/900lb test Cable or 3600lb Dyneema.

Typical harpoon setups are comprised of a dart rigged with between 30 — 36 inches of 1/4 in Nylon or 1/8 in Stainless Cable, attaching to a dart line either loop to loop or with a snap. At Tournament Cable, we have taken this seasoned standard and integrated the finest of modern materials, bringing you a unique rigging that is second to none.

Incorporating 3ft of 3,600lb test, 4mm Dyneema, the line used on the Tournament Cable is half the diameter of the 1/4 in Nylon, and just a few thousands of an inch larger than the 1/8 in Cable. Unlike Cable, the rigged Dyneema lays flat on the dart with no bulging, wide loop or fat cumbersome crimp. This results in a much slimmer, more flexible dart/line connection, which also makes for less resistance, and a cleaner more streamlined entry into the target. While being more durable, the Dyneema is also a softer, more flexible material, and has a much higher abrasion resistance. It lasts much longer than a typical 3-strand line, and does not harden upon exposure to the elements. All these factors taken into consideration, rigging with Dyneema is simply the better option.

Note: 

• 1/4in 3-Strand Nylon has a breaking strength of about 1,400lbs. 
• 1/8in 304 7x7 Stainless has a breaking strength of about 1,700lbs. 
• 4mm Dyneema has a breaking strength of about 3,600lbs.